Ceramic tiles are an excellent choice for backsplashes, floors, and countertops. However, ceramic tiles that have been carefully made can also be utilized to make gorgeous decorations or frames of art.
frames ceramic tiles
A ceramic tile that has been hand-painted or glazed might be thought of as a ceramic painting, and as such, it should be shown in the same manner as a painting would be. The good news is that the cost of framing the ceramic tile artwork you’ve created need not be prohibitive. If you have the appropriate equipment, carry out the necessary preparations, and exercise some caution, you should be able to easily frame your ceramic tiles at home. In order to construct the backing for the frame, cut a piece of luan or plywood to a thin thickness. Wear your safety glasses whenever you’re working with the miter saw. To determine the measurements of the plywood backing, add the width of the quarter-round to a calculation in which the width is multiplied by half. You’ll need to cut a length of hanging wire so that it can span the width of the frame. 
frames ceramic tiles art
It is necessary to put two shallow wood screws into the plywood backing, but they should not go all the way in. Every screw should be positioned so that it is an inch away from the top edge of the frame and one-third of the way down from the top edge of the frame. Twice around each screw, after which the hanging wire is wrapped around it and the screw is tightened to secure the wire in place. The wire used for hanging the picture should not be stretched too thinly, nor should it be so loose that when it is, it extends over the top of the frame. To fit the profile of the front edges of the frame, cut four quarter-round strips. By cutting each piece of quarter-round at a 45-degree angle, you can assure that the pieces will fit together securely at the corners of the project. During the installation of the tile, the curved edge of the quarter-round should be bowed so that it faces the face of the tile. Cut four narrow strips out of the cardboard to use as shims along the edge of the plywood backing. The width of the cardboard shims should be one-half that of the quarter-round, and their thickness should be equal to that of the tile. Put some glue on the cardboard shims and put them around the edge of the plywood backing. 
frames ceramic tiles pictures
When the tile is test-fit into the frame, it should have little trouble fitting securely within the cardboard shims. Put three of the quarter-round pieces in place along the edge of the tile and secure them with nails. When hammering the quarter-round into the cardboard shim that runs along the outside edge, pay careful attention and do it carefully. Slide the tile so that it is sandwiched between the cardboard shims and the protruding lips of the three-quarter-round pieces that have already been installed. Take your time and carefully position the remaining quarter-round piece. You can make photo frames out of inexpensive ceramic tiles by employing a straightforward decoupage technique. A collection of images printed on a tile and uniformly framed can be used to adorn a large wall space in a corridor, living room, or bedroom. The collection should have a unifying theme. 
Investor wants to make sure that they choose the type of tile-roofed steel frame that is best suited for their needs and the planned usage of the structure. You should give some thought to using a steel frame for your tile roof because there are several benefits associated with doing so. As a direct consequence of this, quite a few people continue to go with this particular form of the roof when they are developing their buildings.
Your comment submitted.